Circular Acoustic Ceiling Panels by Making Acoustics

Acustiart acoustic ceiling panels are extremely delicate and should be handled with the utmost care. They come supplied with a plastic cover to prevent damage during transportation, handling, and installation. This plastic should be removed carefully, and it's important not to use sharp objects that might damage the fabric of these sound absorbing products. The panels are relatively heavy, so it's advisable to have two workers for handling purposes. For ceiling assembly using the "Ceiling fixing kit" (optional): Drill holes in the ceiling and insert stud (1). Screw the lag screw (3) through the fastening piece (2). Once the screw has been tightened, thread (4) the part, to which we will have previously inserted (5). Then, thread the part of the brake support (6) that incorporates the rings onto the square piece with a male threaded rod. This piece will slide along the metal guide on the back of the Acustiart panel. For ceiling assembly using the “suspended by metal clip” method (7): This is a recommended method especially conceived for suspending Acustiart panels on ceilings with “T” standard system profiles. There's no need to drill. We recommend checking the admissible weight limit and reinforcing it if necessary. For this, use the special clip for profiles (7) included in the ceiling fixing kit, which is an excellent insulation solution.